AKORD 12mm x 12m Water White Plumbers PTFE Thread Seal Tape Plumbing Joint, 12mm x 0.075mm

Product Information

Using a clean, lint-free wrag dust off any debris from in and around the threads of both sections of the joint. PTFE tape works by sealing and filling any gaps in the threads, no matter how minute they may be, that can cause a joint to leak.

Ensure joints are clean, dry and free from any debris: Once you have cleaned off all the major crud and debris from your joints ensure they are fully dry as the presence of any moisture can cause leaks. One important point to note is that Plumbers Mate should not be used in any areas where is it exposed to pressurised water.It’s very easy to apply, as long as you follow the correct technique for wrapping it around the threads of a pipe fitting. This will keep your work looking extra-professional at shower head connections or exposed plumbing underneath pedestal sinks. Do note that, while the container is an unmistakable red, the tape itself is usually more pink in color.

PTFE tape is more of a preventative measure employed to help minimise the risks of any leaks forming in the future. Teflon tape, properly known as “thread seal tape,” is used in the plumbing industry to seal the threads at the end of a pipe.

With the tape fully secured you can at this point apply a little jointing compound if you wish to fully hold the tape down and also add an additional layer of leak prevention. As you may have guessed from the opening line of this how-to guide, PTFE tape or “polytetrafluoroethylene” tape is known by numerous different names but regardless of what name it’s known to you as they all refer to the same product; PTFE tape. You can now screw the male fitting into its corresponding female piece and it will have a tight seal between the threads. Clean all threads: The first task is to clean everything fully and remove any dust, debris or grime that may be in any of the threads. This PTFE tape comes pre-cut to a specific width and is then wound on a spool so you can decide how long your piece needs to be.

The tape provides a buffer and an effective seal that stops water or gas from escaping the system via the threads of a fitting. Don’t use any more than 3 layers of PTFE tape on a given joint as this can cause leaks Which way do you Wrap PTFE Tape on a Joint? There are yellow and green varieties that are meant for gas and oxygen pipes, rather than plumbing connections. Winterizing your outdoor faucets properly can be done quickly and save you from a frozen plumbing problems later on.standard white PTFE tape can in most cases be safely used with systems that utilise and work with these fuels as the tape itself is able to deal with heat and pressure rather well and due to the fact that PTFE tape won’t react with any such substances it won’t degrade.

The polytetrafluoroethylene tape range comes in gas grade and potable (drinking) water grade and is available in singles or multipacks. Keep a roll of plumber’s tape around your home for quick fixes or to use when you install new plumbing fixtures like shower heads and sinks—you’ll be glad you did!If any more than this is used, as the joint is screwed together it can cause the tape to ruck up in the thread and in turn create a void that can then easily lead to a leak.