Using a pair of sharp scissors, cut the material roughly to size (We recommend 20mm extra on the Width and Height to allow the material to be cut to the shape of the glass) It is also advisable to make sure the Top of your film is straight and in line/square with any pattern.

Once trimmed, continue to remove the water, working from the centre seal outwards in overlapping motions with your Professional Squeegee. If you can’t separate the liner from the film, place a piece of scotch tape on both sides of the sheet, fold the tape over to create tabs, and use the tabs to separate the two sides.Thoroughly spray and soak the glass surface AND the adhesive side of the film with the water mixture. Starting from the Middle/Top, with your professional squeegee, push the water out towards the edges, and then down the middle with a liberal amount of force. SX-SC463 easyfit Axis is recommended for application to interior glass, plastics and polycarbonate sheets.

Use low-lint towels or microfiber cloths to clean the surface, as lint left on the glass can stick under film.A shimmering and beautiful, dichroic textured film, that shifts through a rainbow of colours from a change in light or movement. Warranty does not cover any damage to film during installation or any issues resulting from the improper installation of films. Once happy with the positioning and the film is flat to the glass, spray the non-adhesive side of the glass film with the installation fluid. Elevate your windows and glass with our reeded glass window film 1/4″–adding style, privacy, and a touch of sophistication to any space. The glass effect is still being manufactured by firms such as Pilkington reeded glass but a cheaper alternative to replacing your glazing units is reeded acrylic or vinyl made by 3M and a selection of other quality assured Lustalux sources.

Avoid cleaning the material for the first 30 days, this will allow the film to completely cure to the glass.Once the film has been trimmed, wet the surface and run the squeegee over again using the same technique as before. Place the wet film onto the wet surface, keeping the top edge level but letting the film hang over the edges of the frame on all sides. Before stepping into the world of interiors, she worked as a Senior SEO Editor for News UK in both London and New York. The material should be sealed in place, you can then with your Green Card Squeegee, and Snap off Knife, trim the film to the shape of the window. This film is a durable vinyl with a decorative embossed pattern, 8 mil thickness with a silicone liner and pressure- sensitive adhesive.

Originally popular in buildings dating back to the 1930’s to provide privacy through glazed areas yet allowing a high level of light ingress. Place the Green Card Squeegee on the film and against the edge of the glass, then place the blade of your knife against this. Then she finished it off by applying the reeded glass film on top of the glass, which definitely takes the makeover to another level. If the edges continue to curl, turn a hair dryer to the warm (not hot) setting, hold about 8-12 inches away from the film to evaporate any excess moisture, and repeat the squeegee process. The popularity of this type of “retro” feel has soared in recent times creating a demand for reeded glass or our retrofitted reeded glass window films.

Our film replicates the timeless look of reeded glass, offering a stylish and functional solution for your home or office. We put the reeded film on our bathroom window and we really like how it looks especially during the day when its sunny.