For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use. Power level indicator: The LED on the left is the power level indicator – Purple = high (boost) and Blue = Low (Normal). Incredible build quality – they have been used daily and treated quite roughly and still look immaculate! I found the pod stayed in the mod securely even when shaken about, plus it didn’t even come out all the times the kit got dropped!

The pod is refillable with up to 3ml (Standard) or 2ml ( TPD) of your own e-liquid via the side fill port. Capable of holding up to 2ml of e-liquid, the Sceptre Tube pod is just as easy to use as the rest of the kit. Featuring a top-filling mechanism, just slide off the top of the pod to refill. When it comes to e-liquid, you can use this kit with any flavour you like and as it will create small amounts of vapour we recommend a 50/50 or high PG e-liquid. Nic salts are also popular if you’re looking to experience a smoother throat hit. To fill the pod, remove the silicone plug that’s on its side. The filling hole is large enough to accommodate every style of nozzle, and even most glass droppers.Scroll down to the bottom of the review for the update as to how these kits are performing after being used for 6 months – heavily! What To Expect From Innokin Sceptre Pod Kit… E-liquid level not visible with pod installed – also the cute white LED of the original which lit up the pod compartment is not present on this version. The 5-ohm mesh RDL coil works at 18 or 20 watts and is designed to deliver a restricted direct-to-lung hit with lower-nicotine e-liquids. For RDL Vapers the Sceptre 0.5ohm RDL coil is provided and set the airflow switch to the RDL setting. I use these kits heavily daily – one in use and one on charge. The battery is still charging and holding charge perfectly. The fill port covers and USB ports are still holding up fine – usually these can be the first things that fail with long term use.

Airflow adjustment: use the slider on the side of the pod. At the top setting the airflow is less restricted and in the bottom setting the airflow is more restricted. You can move the slider to any setting in-between too. With the 1.2ohm coil on the higher (boost) power level I got 15 hours in total! I can hardly believe it myself! So far I have refilled this 18 times and the flavour and performance have not deteriorated at all. 70/30 VG/PG Test Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.On the side, there’s the USB-C port, on the front there’s the fire button which has a small LED on either side (we’ll come to those), and then the pod sits nicely in the top and this held in place by some very strong magnets. Now onto the 0.5oHm coil which on the normal setting gives you 18W,and on boost gives you 20W. Loaded with Strawberry Milkshake, I gave it a whirl. I found my best settings were against with the boost and you can really choose with this coil what kind of vape you want. You can get a nice tight MTL draw from this with the airflow shut down, or you can get an equally nice RDL draw from it with the airflow fully open. I found myself using the airflow fully open for a nice restricted direct to lung vape with nice flavour, but I do wish the boost had added more than 2Wto give a warmer vape, but it was still a really nice smooth vape.

Battery capacity remaining – The battery indicator LED will change colour according to the charge remaining in the battery: Red = 10%, Blue = 10-50% and Green = 50% and above. I did find once the blue LED came on that it wasn’t long before the red LED followed – so use the blue LED as a guide of when to look for a charger! Pros

Customer Reviews

I will also add on one of the 1.2ohm coils I recorded how many refills I got and it was 14 (x2ml) and the flavour was just starting to tail off slightly. But no burnt hits at all so it still could have kept going for a few more refills I think! The Innokin Sceptre 2 pod kit is an ideal choice for new and experienced vapers who prefer a discreet device that creates a small amount of vapour. This small and dependable vape is powered by a 1400mAh battery that will deliver up to 20W of power. There is a Sceptre 2 refillable pod included with each kit and is pre-installed with a 0.6 Ohm S Coil, which allows for an RDTL (Restricted Direct To Lung) vape. I've used 80VG juice with the rdl coils and was very pleased with flavour and clouds. I prefer mtl though. I find 50/50 juice works best for that. Insert the sceptre pod into the device and a white LED light under the pod will shine through to show that the pod is securely connected, if you don’t see the light when inserting the pod, first make sure the textured grip bumps are on the open side of the device and the fill port on the closed side, or, if it is the correct way around make sure the base of the pod is fully secured on to the pod. This LED light can also help you see your juice levels in your pod easily. Design Options Make sure to fill the pod before use or else you will burn your coil out! Innokin Sceptre Pod Kit Basic Operation