High Pressure and Flow rate both makes Hydro Blasting Application Efficient and Effective. Whatever your requirement of Pressure and Flow is, PressureJet’s Hydro Blasting System can match your requirement.

Hydro blasting can focus on smaller areas that difficult to reach place or sensitive surface. Because it can be so targeted, you can remove coating or rust in one place without damaging neighboring surface. Hydroblasters and water blasters are available as a complete system or can be acquired as components. Complete systems have all of the components required for the blasting or jet machining applications such as pressure generation / intensification, cabinets, nozzles or wheels, and dust collectors. Hydroblaster components and accessories include blast or jet machine parts that can be used to build a system or replace a worn or broken component. Specific components within a system include abrasive injectors, pressure generators, blast cabinets or booths, water guns, and water tanks. The Hydro Blasting Machine is perfect for specialised service providers, construction firms, renovators, and a variety of other sectors. For really tough cleaning applications that require more pressure and flow, we have a range of Class B hydro-blasters up to 500 BAR for specialists that have been RTO certified. High-pressure water cleaning has become more common over the past few years, often replacing the need for sand blasting. The uses of hydroblasters vary from paint and grease removal, tank cleaning and log debarking, to rodding of heat exchangers and cleaning of sidewalks.PressureJet manufactures manufactures high-pressure Hydro Blasting Machine for the pressures ranging from 140bar (2000 PSI) to 1400 bar (20,000 PSI).This pressure range meet the external surface cleaning requirements of most industrial applications. Aussie Made– Our Monsoon series of cold water blasters are made in-house at our Castle Hill facility by a dedicated team that are passionate about quality. Water blast is a type of high pressure water jet which is used to remove hard surface material . Major difference between a water blaster and high pressure cleaner is the nozzle size and the pressure from the pump. We are an ISO certified and fully Australian owned company. Moreover, we have been making commercial pressure cleaners for over 30 years. We have an extensive dealer network providing local support for selecting the right machine and servicing.

Hydro Blasting is a technique for cleaning external surfaces, which relies entirely on the sheer force of water from a pressurized source to achieve the desired cleaning effect on the intended surface. Abrasives, toxic and potentially harmful chemicals are not used in water blaster.

The main difference between high pressure cleaner and hydro blaster is the water pressure they generated , and water jet pump is not same .

Deadman switches/triggers must never be taped, tied, or otherwise altered so the equipment stays in the “on” position. If the lance is dropped it will whip about wildly, causing serious injuries. Abrasive injectors can convert a hydroblaster into an abrasive blaster. The injection or metering system controls the amount of abrasive pushed into the air stream. In large systems, the delivery system and injection system may be separate components. And setting up and inspecting the water blaster before each use. Hydro Jetting Equipment technician must have specialized training to operate the machine safely. UHP water blasting is one of the most recommended methods for the preparation of surfaces. Especially when it comes to the construction and oil gas industry for surface preparation. Hydro jetting concrete with high pressure cleaner There are hardly any limits to the possible uses of hydroblaster ( hydro blasting). It can be used on streets, pavements , chewing gum removal. graffiti removal, facade renovation, restoration of historic buildings or for road marking removal. Also, the rust removal, paint stripping and descaling of workpiece of various kinds is possible.High Pressure and Flow rate both play key roles in efficient Hydro Blaster Pumps. Typically, hardened deposits respond better to higher pressures, and softer materials are best removed with higher flows. Each application is unique, though, we, at PressureJet, can help you to choose the most appropriate Hydro Blaster Pump for your specific application. Hydro blaster is the cleaning method use high pressure stream of water up to 3000 bar or 40000 psi to achieve the cleaning . It is used to remove old paint, rust, airfield rubber, sugar refinery ,gas and oil industry ,offshore cleaning and heat exchanger jetting.

High pressure hydro blaster machine known as hydrojettingor high pressure blaster, is the process of spraying pressurized water onto a surface to remove surface material and contaminants. As a narrow nozzle is used in hydro blaster, it provides a better cleaning performance. Water blaster requires a lot of practice and a proper technique needs to be followed. Hydro blaser can cause some serious harm due to the higher pressure of water. The operator needs to wear PPE for safety protection.

Product Applications

Hydroblasting typically offers faster surface preparation than alternative methods, bringing with it the above outlined economical benefits. Water blaster machine is employed for the removal of tough stains, paint, and chemicals. It is used for industrial cleaning. Handling water blaster machine requires experience, otherwise, wrong move can damage the surface or object which is being cleaned or may injure the operator . What is the difference between water blast and high pressure cleaner ? Normal wear and tear cause failure point in different types of coating. Watex can remove the all of the coatings with hydro blaster without doing any additional damage to the surface. This is a great advantage of hydro blasting’s ability. The result is an exceptionally clean enough with enough adhesive strength to accept a new coating.