Most anti-mould paints have a life expectancy of approximately 6 years, at which point the effectiveness of the anti-mould solution becomes less effective. But generally speaking, most rooms are repainted with in 6 years of it’s previous coat of paint. Note: PermaPROTECT Anti Mould Additive is HSE-approved and conforms with COPR (Control of Pesticides Regulations). This provides peace of mind that the contained biocides are approved for use and safely incorporated into our products. Anti Mould Additive for Wallpaper Paste and Tile Grout P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions. Suretherm Anti Condensation Paint is an internal water-based emulsion that is specifically designed to help deal with internal mould and damp caused by condensation. It significantly reduces condensation by absorbing any heat that would ordinarily escape through the wall, thanks to its glass microsphere technology. These glass microspheres become charged like a battery by any heat that passes through them. This heat is absorbed and retained in the coating, which works to evaporate any condensation that attempts to form on the treated surface.

Any paint that you have can be turned into an anti-mould coating to protect against mould and fungus in the home using Kair additive. If you want to use wallpaper rather than a paint for your finish, then you can add the anti mould additive into the paste. This will prevent mould growth behind the wallpaper, which is caused by trapped water vapour. The additive will significantly delay the point at which mould will start to form behind the wallpaper. You can also add the anti mould additive to tile grout when tiling kitchens and bathrooms. How to Use Anti Mould Paint Additives Benzisothiazolone. reaction mass of: 5-chloro-2-methyl4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2Hisothiazol-3-one [EC no. 220-239-6] (3:1).The single most important step of any painting project is to prepare the surface before painting, as any professional decorator will tell you. This can make or break your project, so make sure you take your time and don't skip steps. Add to standard emulsion paint and mix thoroughly until an even colour is achieved. Apply mixed paint as per the paint manufacturer’s instructions. Spray existing green mould and moss with “ Kingfisher Bio Wash”, leave for 7 days to activate and then scrub or pressure wash to create a clean surface.

When it comes to damp proof products, Dryzone are one of the first brands to come to mind for us so any list about anti mould paint is naturally going to warrant a double inclusion. This time, we’re talking about their magnolia paint.Kingfisher Anti Mould Paint Additive” is a broad spectrum, liquid fungicidal additive which can be stirred into most water based paints and surface coatings to impart highly effective mould inhibiting properties to the cured paint finish. Once cured the product leaves an “active film” fungicide which is hostile to mould spores and therefore permits re-decorating with confidence that mould will not re-grow. Both our standard “Anti-Mould Emulsion Paint” and our “Mould Cure”, create an active-film fungicide on the surface, upon which mould simply cannot grow. The “Thermapaint Anti-Mould” has the additional inclusion of vacuum ceramic micro-beads, which raise the surface temperature of the wall slightly, discouraging the formation of condensation on the painted surface. In that sense it is dual action paint. It is available in 72 natural colours from our Lakes & Fells collection, developed in Cumbria. Special fungicidal additive that can be added to ordinary emulsion paint to convert it to a special anti-mould Each 50ml pot will convert 2.5ltrs of standard emulsion paint. A unique Fungicidal additive to convert any new colour paint to a powerful anti-mould coating. Once applied, the anti-mould coating stops mould growing on the painted surface. Whilst we went for Ronseal’s anti mould paint as our number one choice for DIYers, all the paints/additives we’ve included will do a good job at inhibiting mould growth.